![](http://pdfasset.owneriq.net/8/dd/8ddf7178-cf88-ca74-c909-eb82ffc9cfe3/8ddf7178-cf88-ca74-c909-eb82ffc9cfe3-bge.png)
12
POWER
PAUSE
REW
PLAY
F.FWD
TITLE SELECT
RECORD
STOP/EJECT
BATT
EJECT
REVIEW
CAMERA VCR
AUTO MAN
COUNTER
DISPLAY RESET
SELECT SET
CLOCK
DATE/TIME
SHUTTER
PUSH/AUTO
FOCUS
AUTO
MAN
FADE
W/B
MANUAL FOCUS
AUD •DUB •VID
EDIT ADV.
TIME LAPSE
TITLE
SELF TIMER
STILL
Powering the Camcorder
Insert Charged Battery
1. Insert battery with the arrow facing
down and “+” side of battery matching
“+ ” side of battery compartment.
2. Press the battery down firmly until it
locks into place.
Notes: If the DC cable is attached to the
camcorder, remove it. The battery cannot
operate the camcorder if the DC cable is
attached.
The battery must be charged before it can
be used the first time.
BATT (Battery)
EJECT Lever
Insert Charged Battery. Match “+” Side of
Battery to “+” on Camcorder.
Using the Battery to Power Your Camcorder
Remove Battery
1. Slide BATT (battery) EJECT lever.
2. Remove battery from the camcorder.
Note: Remove the battery from the
camcorder when not using it. Store in a
cool, dry place.
ATTENTION: LEAD-ACID BATTERY MUST BE DISPOSED OF
PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED
CONTAINS A RECHARGEABLE BATTERY. AT THE END OF ITS
USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT
MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE
MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL
SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR
RECYCLING OPTIONS OR PROPER DISPOSAL.
Pb