HP (Hewlett-Packard) M440 Series Digital Camera User Manual


 
A Managing batteries
Your camera uses two AA batteries, either Alkaline, Photo Lithium, or rechargeable Nickel Metal
Hydride (NiMH). Photo Lithium and NiMH batteries provide longer battery life than Alkaline batteries.
Top points about batteries
The batteries shipped with your camera are AA Alkaline. These batteries have a short life and
are intended to let you begin using your camera immediately. When the camera warns that the
battery charge is low (see Power indicators” on page 40), HP recommends replacing them
with Photo Lithium or rechargeable NiMH batteries for longer battery life.
Fully charge NiMH batteries before using them for the first time.
The first several times you recharge NiMH batteries, they may not provide the number of shots
per charge that you expect. Their performance will improve after the batteries have been
charged, then discharged completely four or five times. You can use the camera normally to
discharge the batteries during this conditioning period.
Always insert the batteries in the camera correctly (see
Install the batteries” on page 4). If the
batteries are inserted improperly, the compartment door may close but the camera will not
operate.
If you do not intend to use your camera for more than one month, remove the batteries from the
camera.
The performance of all batteries will decrease as the temperature drops. To improve battery
performance, store the camera and batteries in a warm inside pocket when in a cold
environment. To prevent short-circuiting the batteries, never carry small metal items such as
keys or coins in the same pocket with your batteries.
Extending battery life
To conserve battery power, the Image Display turns off after a period of inactivity. Pressing any
button wakes up the camera. After five minutes of inactivity, the camera turns off.
To further extend battery life:
Set
Display Brightness to Low (see Display Brightness under Using the Camera Setup
Menu” on page 31).
Set your camera to Auto Flash (see Auto Flash under Setting the flash” on page 13).
Use optical zoom sparingly.
Use video recording sparingly.
Use Image Display sparingly.
If you are turning on the camera only to view images, slide
to , then turn on the
camera to start in
Playback without extending the lens.
When transferring or printing images, place your camera in an optional HP Photosmart dock
connected to AC power.
Safety precautions for using batteries
Always use two identical batteries of the same chemistry, brand, and age.
Do not place batteries in fire or heat them. Always store charged batteries in a cool location.
Do not connect the positive and negative terminals of the battery to each other with any metal
object.
Do not carry or store batteries with metal objects. Do not drop batteries into a change-filled
pocket.
Do not pierce batteries or subject them to strong impacts or shocks.
Do not solder directly onto batteries.
Do not allow batteries to get wet.
Managing batteries 39