Filter
Top Products
Bracketing—Creates a set of three images, each set to a different value.
● Off (Default)—Processes the image as normal.
● Adaptive Lighting—Images created with Adaptive Lighting set to Off,
Low, and High.
● Exposure—Images created at value set for Exposure Compensation
and under- and over-exposed by the value you select using
.
● Color—Images created in full color, black & white, and sepia.
During Instant Review (see Instant Review on page 12), you can delete the
entire bracketing sequence. To delete individual images, see Deleting
images on page 25.
Image Quality—Sets resolution and compression for images. The greater the
number, the higher the resolution. The fewer stars, the greater the
compression (see Image quality on page 54).
● 6MP
—For enlarging or printing images greater than 28 x 36 cm
(11 by 14 in).
● Normal (6MP
) (Default)—For printing images up to 28 x 36 cm (11
by 14 in).
● 4MP
—For printing images up to 20 x 25 cm (8 by 10 in).
● 2MP
—For printing images up to 13 x 18 cm (5 by 7 in).
● VGA
—For sending images via e-mail or posting them to the Internet.
● Custom...—For specifying a custom combination of resolution (6MP,
4MP, 2MP, VGA) and compression (
to ). Use to move
between Resolution and Compression, and
to specify a setting.
Video Quality—Sets resolution and compression for video clips. The fewer
stars, the greater the compression.
● Normal (VGA
) (Default)—For outdoor action video clips or
printing individual video frames up to 10.2 by 15.2 cm (4 by 6 in).
● VGA
—For indoor video clips or printing individual video frames up
to 7.6 by 12.7 cm (3 by 5 in).
●
QVGA
—For capturing longer video clips or e-mailing shorter clips.
Burst—For taking two or more shots quickly in succession (see Using the
Burst setting on page 21).
On, Off (Default)
White Balance—Balances color based on lighting conditions. For more
information, see White Balance on page 22.
● Auto (Default)—Corrects for scene illuminance. For general picture
taking.
● Sun—For outdoor scenes in sunny or cloudy conditions.
● Shade—For outdoor scenes in shade or at dusk.
● Tungsten—For indoor scenes with incandescent or halogen lighting.
● Fluorescent—For indoor scenes with fluorescent lighting.
● Manual—For setting a custom White Balance based on your target
subject. To set the white balance, select Manual, then follow the on-
screen instructions.
(continued)
HP Photosmart R725/R727 Digital Camera 19