Filter
Top Products
Install the battery
1. Open the Battery/Memory card door by
sliding the latch as indicated on the Battery/
Memory card door.
2. Insert the battery in the larger slot, pushing
the battery in until the latch catches.
3. Close the Battery/Memory card door.
Note Turn the camera off before
removing the battery. Fully charge the
battery before using it the first time (see
Charge the battery on page 7).
Charge the battery
You can charge the battery in the camera using an AC power adapter or in the extra
battery bay of an optional HP Photosmart Premium camera dock.
1. Connect the AC power adapter to the camera,
then plug it in to an electrical outlet. If you are
using an optional camera dock, plug in the
dock, then dock the camera.
2. The camera’s blinking Battery Charging light
indicates that the battery is charging (if you are
charging in an optional HP Photosmart
Premium camera dock, the dock's Battery
Charging light blinks). The battery is fully charged when the Battery Charging light
turns on solid (approximately 2–3 hours).
Note You can also charge the battery using an optional HP Photosmart quick
recharger.
Turn on the camera
To turn on the camera, press the button.
Choose the language
Use to choose the language you want, then
press
.
To change the language later, use the Setup menu (see
Using the Setup Menu on page 39).
HP Photosmart R725/R727 Digital Camera 7