HP (Hewlett-Packard) 730 series Digital Camera User Manual


 
Chapter 1: Getting started 17
Installing a memory card (optional)
Your camera contains 16 MB of internal memory that allows
you to store images and video clips in your camera. However,
you can use an optional memory card (purchased separately)
instead to store images and video clips. For information on the
memory cards that are supported with your camera, see
Purchasing camera accessories on page 102.
NOTE If a memory card is installed in the camera, all new
images and video clips will be stored only on the memory
card. The internal memory and its file system are not
available when a memory card is installed in the camera.
1 With the camera turned off and the
back of the camera facing you,
open the memory card door by
sliding the door to the right.
2 Insert the memory card, making
sure that it clicks into place.
3 Close the memory card door.
To remove a memory card, turn the
camera off and open the memory card
door, then push the memory card in, and it will spring outward
from the slot.