Filter
Top Products
76 hp photosmart 730 series user’s manual
The camera
batteries will
not charge.
(continued)
Battery voltage
is too low for
charging to
start.
The camera will not attempt to
charge batteries that may be
damaged or over-discharged.
Remove the batteries from the
camera and charge them in an
external battery charger, then try
them in the camera again. If this
does not work, it is likely that one
or more of the batteries are bad.
Purchase new NiMH batteries
and try again.
The wrong AC
power adapter
is being used.
Use only the HP AC power
adapter approved for use with
this camera. See Purchasing
camera accessories on page 102.
The batteries
are damaged
or bad.
NiMH batteries degrade over
time and can fail. If the camera
detects a problem with the
batteries, it will not start charging
or will stop charging prematurely.
Purchase new batteries.
The Memory/
USB light
blinks as if
the batteries
are being
recharged,
but there are
no batteries
installed.
The camera
does not
recognize that
there are no
batteries
installed.
Do nothing. The blinking is
harmless and should stop after
5-30 minutes.
Problem Possible cause Solution