Filter
Top Products
18 hp photosmart 730 series user’s manual
Turning on power
Turn the camera on by sliding the
switch to the right and then
releasing it. The Memory/USB light will
blink and then turn off when the camera
is ready.
Restoring previous settings
Some of the camera settings do not remain set when the
camera is turned off. To restore all camera settings that were in
effect when the camera was last turned off, hold down the OK
button when you turn on the camera.
Choosing the language
The first time you turn the camera on, the following screen
appears and prompts you to choose a language.
1 Scroll to the language that you
want by using the buttons.
2 Press the OK button to select the
highlighted language.
NOTE If you need to go back and
change this setting later, you can do this in the Setup
menu. See Chapter 6: Using the setup menu on page 67.
AF