Filter
Top Products
Chapter 5: Unloading, printing, and displaying images 63
Printing images
NOTE If you are using the HP 8886 camera dock to do this
task, see the HP 8886 Camera Dock User’s Manual.
To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP Photosmart
printer or to any other HP printer with front panel USB ports,
then print images selected from the camera Share menu or all
images in the camera.
To print directly to an HP Photosmart printer or to any other
HP printer with front panel USB ports:
1 Turn on the camera.
2 Check that the printer is turned on and is online. (There
should be no blinking lights on the printer or error messages
displayed about the printer.) Load paper into the printer, if
needed.
3 Your camera came with a
special USB cable for
connecting the camera
directly to a printer.
Connect the square end of
the USB cable to the printer.
4 Open the rubber door on
the side of the camera and
connect the small end of
the USB cable to the USB
connector on the camera.
A
F