Filter
Top Products
English
113
VIEWING ON TV SCREEN
1 Turn the TV on and set the input selector to
“VCR” whichever applicable Video input.
Refer to the TV instruction manual for how to
switch the TV input.
2 Turn the DVD video camera/recorder on.
The image that the DVD video camera/
recorder is seeing will appear on the TV
screen.
You can also monitor the image on the LCD
screen or viewfinder of the DVD video
camera/recorder.
3 Perform playback, recording or editing.
You can perform playback, recording or
editing on Disc Navigation while checking on
TV screen.
Note:
• Adjust the volume of sound on TV.
• Information during recording and playback will appear
on the TV screen: You can also switch off the display
during recording. Refer to “SETTING ON-SCREEN
DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)” on
page65.
• When copy-guarded disc is played back, no image will
appear on TV screen.
• If you use TV with wide mode (aspect ratio 16:9) and
set the TV to the wide mode, the entire Disc
Navigation display may not be displayed on the TV
screen. If this happens, release the wide mode setting
on TV (see the TV instruction manual for releasing the
wide mode).
HDD
HDD