Hitachi DZ-HS500SW Camcorder User Manual


 
English
140
CARD ALMOST FULL Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
84, 105, 156
Card error has
occurred.
The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
Data other than still image may be included: Use another card.
24
Card error has
occurred.
Format the card now?
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose “YES” and format it.
104
Card error has
occurred.
Formatting is not
complete.
The card may be damaged: Use another card.
24
Card error has
occurred. Keep card
inside & restart.
Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again.
25, 30
Card full. Delete unnecessary stills and try the card, or use another card. 84, 156
Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
104
CHECK CARD The inserted card cannot be used in this DVD video camera/
recorder: Use another card.
24
CHECK DVD A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
24, 105
CHECK HDD The HDD may have been destroyed. Also check to see whether
the HDD is write-protected.
105
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
106
Use another disc.
See *3 and *4 on page 144.
COPY PROTECTED The video signal input to this DVD video camera/recorder may be
copy-guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
Copy-guarded materials cannot be recorded on this DVD video
camera/recorder.
116
Dubbing is not
complete.
This message will appear when dubbing has failed.
79
DVD error has occurred.
Finalizing is not
complete.
Disc error occurred during finalising, and finalising failed.
Replace the disc.
See *3 on page 144.
107
DVD error has occurred.
Format the DVD now?
Has the disc been initialised on PC? Has initialising the disc on
PC been interrupted?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. Initialising the disc will erase all data on it.
See *2 on page 144.
104
Message Cause & Troubleshooting
Reference
page