Hitachi DZ-HS500SW Camcorder User Manual


 
English
87

DIRECTING SCENES EFFECTIVELY (EFFECT – FADE)
You can add fading to the beginning and/or end of scene.
There are three types of special effects:
1 Press the DISC NAVIGATION button.
2 Place the cursor on the scene to which fade is
to be added.
3 Press the MENU button.
4 Choose, “Scene”, “Effect”, “Fade” and then
press the button.
5 The “Fade” screen will appear: If you are sure
you want to add the fade effect to the scene,
press the button.
If you want to change the scene to which fade
is added, you can change it on this screen.
6 Select the special effects for “IN” and/or
“OUT”, choose “Enter”, and then press the
button.
You can use the 2/1 buttons to move the
cursor to “IN”, “OUT”, “Enter” or “Cancel”.
Use the 0// buttons to choose the effect
to be added, and then press the button
to set the effect.
To cancel setting, choose “Cancel”.
If you choose “Enter” and press the
button, the “Fade” screen will be restored
after a message appears.
Repeat steps 5 and 6 to add fade to other
scenes.
7 Press the button to quit.
The “2” and/or “3” icon(s) will appear in
the scenes for which fade in and/or fade out
have been set.
Note:
If a disc on which fade has been set on scene with
this DVD video camera/recorder is played on a DVD
recorder/player, or the scene is captured into a PC,
the set fade will not be reflected (see Note on
page 75).
When dubbing on a DVD-RW (VF-mode)/DVD-R/
+RW, the setting on fade will not be reflected (see
page 79).
HDD
HDD
Fade Out Fade Out Fade Out
White:
Fades in from white screen
Fades out to white screen
Wipe:
Fades in from black screen
to vertical direction of screen
Fades out from vertical
direction of screen to black
screen
B/W:
Fades in from Black and
White screen to colour screen
Fades out from colour screen
to Black and White screen
Fade InFade InFade In
PLAY
“In” effect
“Out” effect