Filter
Top Products
English
32
Setting Date and Time
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
1 Press the MENU button, use the 2/1/
0// buttons to choose “Date Set” on the
“Date Setup” menu screen.
2 Press the / button.
The figure for the day
will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
Note:
After setting the figure for the day, press the /
button to select the digit to be set. If you press the
button after selecting the figure for the day, the
screen for verifying the set date will appear instead
of screen for setting month, year or time.
3 Press the 0 or /
button to select the digit
you want to set in
sequence.
Press the 2 or 1 button to select the
number for current date/time, and then
repeat step 3 to set the current date and time.
Note:
To stop date/time setting midway, press the
button.
4 After setting the current
date and time, press the
button.
The screen for verifying
the set date will appear.
5 If the displayed date and time are correct,
press the 0 button to choose “YES”, and
then press the button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
CHANGING DISPLAY FORMAT OF DATE AND TIME
You can select one of three date display formats: day/month/year, month/day/year or year/
month/day. Choose “Date Mode” on the “Date Setup” menu screen in procedure 1, and then set to
the desired date display mode.
Note:
This DVD video camera/recorder incorporates a rechargeable battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be reset. To prevent this, every 6 months, connect the AC
adapter/charger to DVD video camera/recorder and connect them to AC outlet, or attach a charged battery to the
DVD video camera/recorder, and leave it for at least 24 hours with the DVD video camera/recorder turned off: The
built-in battery will recharge.
HDD
HDD
Use 2 / 1 / 0 / / buttons
to select, and then press to
designate.
Date Mode
ENTER RETURN
Date Set 1 / 1/2007
Dat e Se t up
0:00
Date Mode
ENTER RETURN
Dat e Se t up
0:00
Date Set 1/ 3/2007
ENTER
1/ 3/2007 8:00
Date set up?
YES NO
Dat e Se t