Hitachi DZMV350E Camcorder User Manual


 
144
English
Changing Setting of Demonstration
This DVD video camera/recorder has versatile functions, including special effects.
Referring to the procedure on page 41, connect the DVD video camera/recorder, AC adapter/charger and
power cable to power the DVD video camera/recorder from AC outlet.
1 Press the MENU button.
2 Choose “Initial Setup”,
“Demo Mode”, and then
press the
button.
3 Use the joystick to choose
the desired option, and
then press the
button.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
camera/recorder on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
Press the MENU button again: The menu screen
will disappear.
To stop the demonstration midway, press the
button.
The demo mode will end when the DVD video
camera/recorder is turned off or the DISC
EJECT button is pressed down.
Note:
You can press the DISC NAVIGATION button to stop
demonstration midway: The Disc Navigation screen will
appear.
If you choose “Auto”, the demonstration will not start if a
disc is loaded with the power switch set to “
VIDEO” or
PHOTO”, or a card is loaded with the power switch
set to “
PHOTO”.
The demonstration function will not work when the DVD
video camera/recorder is connected to PC.
While the demonstration is being given, the recording
indicator will blink.
Initial Setup
RAM
Off
Start
ENTER RETURN
Demo Mode
Reset
Record LED
Power Save
Beep
Language
Auto