Filter
Top Products
90
English
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
This DVD video camera/recorder will emit a sound when the power switch is changed over, the REC
button is pressed to record a movie, or other operations are engaged. If you do not need operating sound,
you can switch it off.
1 Press the MENU button,
choose “Beep” on the
“Initial Setup” menu
screen, and then press the
button.
2 Select “On” or “Off”, and then press the
button.
3 Press the MENU button to end the setting.
Note:
The “Beep” setting will be stored in memory even when the
DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
This DVD video camera/recorder is equipped with power save function. Specify “Power Save: On”: If
the DVD video camera/recorder is left in the recording pause status without being operated for 5 minutes,
it will automatically turn off to prevent the battery from discharging needlessly.
1 Press the MENU button,
choose “Power Save” on
the “Initial Setup” menu
screen, and then press the
button.
2 Select “On” or “Off”, and
then press the
button.
3 Press the MENU button to end the setting.
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function, set
the power switch to “POWER OFF”, and then set it to “
VIDEO”, “
PHOTO” or “ PHOTO”
• The Power Save setting will not appear in the on-screen
information display.
• The Power Save setting will be stored in memory even
when the DVD video camera/recorder is turned off.
Setting Content
On Beep is heard
Off No beep is heard
Initial Setup
On
Off
RAM
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Record LED
Setting Content
On To engage power save
Off To cancel power save
Initial Setup
On
Off
RAM
Power Save
Beep
Record LED
ENTER RETURN
Demo Mode
Reset
Language