Filter
Top Products
36
English
●Using Remote Control
Point the remote control to the infrared receiver on
the DVD video camera/recorder. The remote
controllable distance is up to 5 m.
Note:
• When using the remote control, make sure that the
infrared receiver on DVD video camera/recorder is not
exposed to direct sunlight or any intense light. If the
infrared receiver is subject to light stronger than the
infrared light from remote control, the DVD video camera/
recorder cannot be operated by remote control.
• If there is an obstacle between the remote control and
infrared receiver on DVD video camera/recorder, remote
control may not be possible.
• The DVD video camera/recorder uses the “VCR2”
remote control code of Hitachi VCRs. If you use a Hitachi
VCR, etc. with remote control code set to “VCR2”, a VCR
placed near the DVD video camera/recorder will also be
operated by the remote control: To prevent this, change
the remote control code of the VCR.
10˚
10˚
15˚
15˚
A
p
p
r
o
x
.
5
m
Infrared
receiver