Filter
Top Products
English
129
5 On the “Importing Device” screen, choose
“Hitachi DVDCAM (HDD)” when the power
switch is set to “HDD”; and “Hitachi
DVDCAM” when the power switch is set to
“DVD”.
If you wish to change the import device, and
continue import, unplug the PC connection
cable from the PC, and then change over the
power switch (see page 123).
6 Select the images from which you wish to
create a DVD-Video, and then click “Import”.
The image recorded on HDD, disc will
appear. Select the chapter to be imported into
PC, and then click “Import”: Importing into
PC will start.
If you wish to import images on another disc
after importing images on one disc, click the
“Eject” button. The disc insertion block of
DVD video camera/recorder will open:
Remove the disc, insert the other disc whose
recorded images you wish to import, and
then close the disc insertion block. After a
short while, the images on the disc will
appear: Perform the same procedure to
import the images. When the images on
DVD-RW (VF-mode)/DVD-R/+RW are
imported, the recording date/time will not
appear.
Note:
• To import all chapters in the title at once, click “Select
all” in the editing menu at the top of screen, and then
click “Import”.
• To import multiple chapters, click the desired chapters
while holding down the Ctrl key.
7 Click “Authoring” and create a DVD-Video
menu.
Clicking “Authoring” will display the editing
screen of DVD-Video menu. The video file
previously imported into PC will appear in
“Source”. Choose the desired video file, and
click “Add titles”: The video file will be
registered.
When using a video file imported into PC
using ImageMixer 3, click “File” to choose the
folder in which the video file will be stored.
Clicking “Theme” or “Set title menu” will
allow you to change the design of DVD-Video
menu.
Choose the type of disc to be created (8 cm/
12 cm/2-layer) using [Set] - [Configuration].
Click
Click
Eject button
Click