English
150
Miscellaneous
“Hardware Removal”
results in error.
Exit Windows
®
once, and then disconnect the DVD video camera/
recorder. If your PC uses Windows
®
2000 Professional, the
problem may be solved if you install Windows
®
2000 SP3 or later.
126
No USB HS (high
speed) connection even
when USB2.0 card is
used.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
—
Symptom Cause and Correction
Reference
page
No DVD video camera/
recorder operation.
Is a fully charged battery attached?
Is the DVD video camera/recorder powered from AC outlet? 26, 27
Power does not come
on, or no operation
occurs by pressing
button.
Execute system reset (press the RESET button). 152
Has the DVD video camera/recorder been subjected to impact?
The DVD video camera/recorder could be damaged. Consult your
dealer.
—
The date and time are
incorrect.
Has the DVD video camera/recorder been left unused for a long
period of time?
The internal backup memory battery may be discharged:
Charge it.
33
Pressing the SLEEP/
RESTART button will
not set to the sleep/
restart standby status.
• Is the proper disc or card loaded?
• Does the HDD, disc or card have remaining free space?
• Is the DVD video camera/recorder now playing back?
• Is Disc Navigation screen displayed?
43
No scene can be
deleted.
Is the cursor placed on the scene to be deleted?
If the selected scene (framed in red) exists, that scene will be
deleted even if you use yellow cursor to select any scene. Check
the colors of cursors and bar graph on the thumbnail screen.
75, 85
Disc cannot be
removed.
(Cover will not open.)
Did you detach the battery or AC adapter/charger before setting
the power switch to “OFF”?
Is the battery charged?
Connect a charged battery or the AC adapter/charger, and then
press the DISC EJECT button to remove the disc.
Did the DVD video camera/recorder turn off because the battery
remaining level ran out?
Connect a charged battery or the AC adapter/charger, set the
power switch to “OFF”, and then press the DISC EJECT button to
remove the disc.
Is the power switch set to “HDD” or “SD”?
Set the power switch to “DVD” or “OFF”, and then press the DISC
EJECT button.
26, 27, 31
Disc cover cannot be
closed.
Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.
38
Connect a fully charged battery or AC adapter/charger, and then
turn the DVD video camera/recorder on.
26, 28
Symptom Cause and Correction
Reference
page