Filter
Top Products
English
34
1<>2/3
Initial Settings
Press the MENU button, and then use f/e/d/c/A buttons to display the “Initial Setup”
menu screen. See page 49 for detailed operation procedure. Press the MENU button again to exit
setting.
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Select “On” or “Off”, and
then press the A button.
On: Beep will be heard
when the power
switch is changed
over, the REC button is pressed when
HDD/disc is used, the SLEEP/RESTART or
EJECT button is pressed, etc.
Off: No beep is heard.
Note:
The “Beep” setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select “On” or “Off”, and
then press the A button.
On: To engage power
save. If the DVD
video camera/
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to “OFF”, and then set it to
“HDD”, “DVD” or “SD”.
• The Power Save setting will not appear in the on-
screen information display.
• If the sleep/restart standby status continues for 30
minutes, the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting.
CHANGING DISPLAY LANGUAGE (LANGUAGE)
You can change the language used to display the menu and information.
The following shows that English is changed to French.
1 Press A or c button
with the screen shown
on the right displayed:
The “Language” screen
will appear.
2 Choose “Français”, and
then press A button.
The display will change
to French.
Note:
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
HDD
HDD
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Record LED
Initial Setup
On
Off
Power Save
Beep
Record LED
ENTER RETURN
Demo Mode
Reset
Language
Initial Setup
On
Off
Language
English
Auto
ENTER RETURN
Off
On
On
Power Save
Beep
Demo Mode
Reset
Record LED
Initial Setup
Français
Deutsch
ENTER RETURN
Español
Italiano
English
Language