Filter
Top Products
RECORDING TV PROGRAMS (only for VM-8500LA) - 47 -
1. Insert a recorded tape.
Be sure that the record safety tab is not missing.
2. Place "CAM/OFF/VIDEO" in "VIDEO" position.
3. Press "DISPLAY" to display the tape counter.
4. Press "PLAY" and then "REW/REVIEW" or "F.FWD" to search to the approximate position of the tape on
which you want to dub sound and picture.
5. Press "PLAY" again to search the exact position where you wish to stop dubbing and then press
"REC/PAUSE" at the exact position.
6. Press "RESET" to set the tape counter reading to "0000M".
7. Press "REW/REVIEW" to rewind the tape to the approximate position from which you want to start dubbing.
8. Press "PLAY", and when the exact position to start dubbing is reached, press "REC/PAUSE".
9. Press "DUBBING AUDIO/VIDEO" and "PLAY" simultaneously twice. "A/V DUB II" is displayed in the
viewfinder or on the LCD monitor, and at the same time the picture to be dubbed appears.
10. Press the "REC/PAUSE".
Dubbing will start and stop when the counter reaches "0000M".
RECORDING TV PROGRAMS (only for VM-8500LA)
If your TV or VCR has video/audio out jacks, you can record the TV program with camcorder.