Filter
Top Products
Advanced Techniques - 29 -
Start/Stop button to resume recording.
Using Quick Edit
Use quick edit to search for the end of previously recorded material, find a particular spot on your tape, begin
editing, or record new material. While the camera is in record/pause mode hold down the F.F, REW, or PLAY
button and visually search the tape. Release the button and the camcorder stops the tape at the exact position
you selected.
Using Macro
This function allows you to shoot subjects as close as 3/8 inches (1cm). Press and hold the power zoom control
W. The camera focuses on the subject automatically. Check your lighting as it tends to be insufficient when
filming close up.
Date Search
The date search function memorizes the start and end positions of recordings you made on a specific day so you
can easily locate those positions later as long as the cassette is left in the camcorder.
Note: Be sure that the date and time are set.
1. Attach a power source and slide the CAM/OFF/VIDEO switch to VIDEO.
2. Press the DATE/TITLE button (the DISPLAY button on the remote control) to display "SEARCH" in the
viewfinder.
3. Press the REW button to search for the start position from which you last made a recording or the F.F button