Filter
Top Products
Advanced Techniques - 32 -
Note: Use the wireless remote control within the range of the infrared receiver of the camcorder shown
above.
Note: The wireless remote control may not function in strong light such as direct sunlight or very bright
artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared receiver. The wireless remote
control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR with the same
code your Hitachi VCR may malfunction when you use the camcorder's wireless remote control.
How to attach the optional remote control holder to a generally available
shoulder strap
It is recommended that you fit the remote control into the holder and attach the holder to the shoulder strap so as
not to lose the remote control and for convenience when shooting outdoors.
1. Attach the holder to the shoulder strap.
2. Attach the remote control to the holder. Fit the remote control into the holder as shown in the figure below and
push until a click is heard.
To remove the remote control
Push both sides of the holder until the remote control is released from the tab. The rear of the remote control will
be released from the holder and will lift slightly.