Filter
Top Products
General Maintenance - 44 -
No picture appears on television
screen when"PLAY" is pressed. (TV is
connected to the camcorder by using
RF output adapter.)
§ Set the television to the camcorder
channel (3 or 4) depending upon the
selected channel in the RF channel
select switch of RF output adapter.
Interference on playback picture. (TV is
connected to the camcorder by using
RF output adapter.)
§ When you see the playback picture
on your TV adjust fine tuning knob
on television set to obtain best
picture.
§ Color of your TV screen is too bright,
too faint or
§ TV set has VIR circuit. Turn it off
during playback.
Picture bends at the top of the TV
screen.
§ TV receiver is of older type. It needs
to be modified to work properly with
camcorder.
§ Tape is damaged. Try another
cassette.
§
Date search function does not operate § Slide the CAM/OFF VIDEO switch to
VIDEO.
§ Insert the clock battery, set the date
and time, then start recording.
§ Do not remove the clock battery after
recording.
§ Do not eject the recorded cassette.
Leave it in the camcorder.
The playback picture moves rapidly
and noise appears. Also sound
speeded up from normal is heard.
§ The camcorder is set to the double
speed playback mode. Pressing the
playback button to restore the
normal playback mode. The sound
also returns to the normal speed
Noise appears in the picture during
double speed playback, but this does
not indicate a fault. See page 30 for
details.
BATTERY CONDITION
Symptom Check Point & Correction
The ( ) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
§ Try another battery or charge the
battery.
NO OPERATION IS ACCEPTED
Symptom Check Point & Correction