Filter
Top Products
INSERTION AND REMOVAL OF CASSETES
16
INSERTION AND REMOVAL OF CASSETES
Before inserting or removing a cassette, be sure to connect the power source. When a power
source is connected, the cassette can be ejected and removed whether the power is on or off.
Insertion
1. Slide the "EJECT" switch.
The cassette door will open.
2. Insert a cassette so the transparent window is toward you and the arrow toward the cassette
holder. Slide the cassette into cassette holder as far as it will go.
3. Press the cassette holder.
Push the section of the holder marked "PUSH" until a click is heard.
The camera/recorder will automatically close the top of the cassette compartment. Do not
press the door down, or you may damage your camera/recorder.
Removal
Slide the "EJECT" switch and remove the cassette.
8mm Video Cassette
An 8mm Video Cassette has a record-protect tab on the side of the cassette that can be slid to
prevent accidental erasure of recorded material.
To prevent accidental erasure, slide the record-protect tab in the direction of the arrow until the
red tab is completely visible.
To record on the cassette again, slide the record-protect tab in the direction of the arrow. The
red tab will disappear behingd the cassette case.