Filter
Top Products
ATTACHING THE TELE OR WIDE CONVERTER
45
ATTACHING THE TELE OR WIDE CONVERTER
1. To remove the lens hood, turn it counterclockwise.
2. Remove both caps of the tele or wide converter.
3. Screw the lens into the threads on the front of video camera/recorder lens assembly.
CAMERA/RECORDER TO VCR DUBBING
If you wish to exchange or copy some of your friend's favorite home recordings, the following
instructions can be used to connect camera/recorder to VCR for this purpose.
Camera to VCR dubbing hookup Illustration
1. Connect the AV stereo output cord to "AV IN/OUT" of your camera/recorder.
2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in diagram
above.
NOTE: If your VCR has a single (mono) audio input, connect either the left or right audio plug to the
audio input on the VCR.
3. Play the tape on the camera/recorder and record it on the VCR.
NOTE: If you connect the "VHF OUT TO TV" connector of VCR to the "TV ANT" connector, as
illustrated and set "VCR/TV" selector of the VCR to "VCR" mode, the picture being dubbed by
VCR can be monitored.