Filter
Top Products
TITLE RECORDING
37
NOTE: The power switch may be in either the "CAMERA" or "VIDEO"
2. Press "TITLE" button. The flashing cursor will appear in the viewfinder.
3. Press "SHIFT" button repeatedly to move the flashing cursor to the place you want to begin
your title.
4. Select the first character for your title by pressing the (-) or (+) button repeatedly until the
desired character appears.
NOTE: Each title can contain up to two lines of 16 characters each. A chart showing the characters
contained in the titler is located on page 33.
5. After you have selected the first character, press "SHIFT" button to move the flashing cursor
to the place you want the next character.
6. Repeat steps 4 and 5 until you have completed the title.
NOTE: Character may flash, however it will be recorded correctly without the flashing.
7. After completeing your title, press "PAGE" button and create the title on another title page.
8. After creating the title, press "TITLE" button to remove the title graphics from the viewfinder.
Now title graphics is stored in memory.
Correcting Errors During Title Storage
1. Press "SHIFT" button repeatedly until the character to be corrected will flash.
2. Press either "-" or "+" button until the correct character appears.