Hitachi VM-H835LA Camcorder User Manual


 
Playback
37
2. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
VIDEO.
3. Press the PLAY button and enjoy your video.
4. Press the STOP button when finished.
Using Still
To view a still picture during playback press the Start/Stop. Press the Start/Stop button
again to resume playback. If you leave the camcorder in play/pause mode for more than
5 minutes the camcorder automatically stops the cassette to prevent damage to the
tape.
You can view a still picture with less noise on the LCD monitor.
Note: The still picture will have several noise bars in the viewfinder and on the TV, but this
does not indicate a fault.
Note: If you are freezing a picture with the LCD monitor closed, then you will not be able to
view a still picture with less noise when you open the monitor.
Using Forward and Reverse Search
When looking for a particular point in your videotape use the F.FWD button and
REW/REVIEW button to find the spot quickly.
When the LCD monitor is closed:
• Press F.FWD button during playback to play the tape forward at approximately 9 times
normal speed. Press PLAY button to return to normal playback.
• Press REW/REVIEW button during playback to play the tape backwards at
approximately 7 times normal speed. Press PLAY button to return to normal playback.