Filter
Top Products
Controlling Your TV with the Camcorder's Remote Control
61
Programming the Remote Control
• Turn the television on (any channel is okay).
• Aim the camcorder's remote control at your TV set. Hold down the CH ( ) button while
you press the button corresponding to your brand of television as shown in the chart
(page 51).
For example, if you have an RCA television, press CH ( ) and DISPLAY at the same
time. If this button combination sends a signal that matches your TV, the channel will
change on the TV, and you'll know the remote is set to control the television.
• If that button combination does not change the TV channel, go through the whole list
of button combinations one by one until you find one that does change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the buttons. One of them may
work for you.
If the TV channel still doesn't change after going through all the button combinations
listed, it is likely that you will not be able to program this remote control for your TV.
TV Brands Press CH (
) and This Button
Hitachi AVX
Zenith VOL (
)
Sony ZOOM.(W)
Magnavox REW
Sanyo PLAY
Gold Star 1 F.FWD
Toshiba AV DUB
Gold Star 2 STOP
NEC PAUSE (START/STOP)
RCA DISPLAY
Panasonic TITLE ON/OFF
Mitsubishi ZOOM.(T)
JVC COUNTER RESET
Sharp REVIEW
Controlling the TV
Once programmed, the camcorder's remote control is ready to control the TV.
• Press the button of the TV function that you want.
Be aware that not all of your TV's functions may work even though the remote control is
correctly programmed.