Hitachi VM-H835LA Camcorder User Manual


 
Controlling Your TV with the Camcorder's Remote Control
60
beginning of the next segment and resumes playback. The recording VCR is
automatically released from the record pause mode and resumes recording.
• It continues recording and pausing until all the programmed segments are edited.
12. When simple programmable edit is finished, the camcorder will enter the stop mode,
and the VCR will enter the record pause mode.
Note: If you make a mistake during programming, start again from the beginning or press
the COUNTER RESET button to return to the previous steps one by one and enter the
correct program data.
Note: After the simple programmable edit is finished, the programmed data is erased. If you
want to continue editing other segments, repeat steps 5 - 12.
Note: Most VCRs (recording machine) may be released from the record pause mode if it
continues for more than five minutes.
Note: The dubbing start and end positions may slightly drift from the specified positions
when certain VCRs are used.
Note: Reduce the volume of the camcorder as low as possible during dubbing. Otherwise
the played back pictures could be distorted.
To End Programmable Simple Edit
Press the PROGRAM button to remove the program display from the viewfinder or the
LCD monitor. Then press the stop button on the recording VCR to set it to the stop
mode.
Note: If the CAM/OFF/VIDEO switch of the camcorder is set to OFF or CAM when the
recording VCR is in the record pause mode, the VCR enters the record mode.
Controlling Your TV with the Camcorder's Remote Control
The remote control is designed to be compatible with many televisions, but will not work
with every one made. If your TV does not respond the way it should when you program
it as explained below, this remote may be incapable of operating it.
Once you have programmed the remote, you won't have to do it again until you change
the batteries.
This remote control can be used with your TV as well as the camcorder, as long as your
TV comes with a remote control. This feature comes in handy - you don't have to juggle
two remotes.
The remote control is compatible with the fourteen makers of TVs listed on the next
page - but don't be alarmed if yours is not on our list. You may still be able to program
the remote for your TV.
Every TV that comes with a remote control is set up to detect certain infrared signals.
You need to program the camcorder remote control to send signals that your TV will
recognize and respond to. Here's what to do: