Filter
Top Products
HD3MDIP/X Network Camera Reference Guide
Document 800-04132V1 Rev A 33
01/10
Step 3: Log Onto the IP Utility and Discover Network Devices
1. Double-click the Honeywell IP Utility icon on your desktop.
-OR-
Click Start
➤ Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤ IP
Utility ➤ Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
Figure 3-2 Honeywell IP Utility Log On Window
2. Select Administrator or Guest from the User Name drop-down list.
3. Enter the case-sensitive password in the Password field.
• The default Administrator password is 1234.
Only one Administrator can be logged on at a time.
• The default Guest password is guest.
Note During the installation set up, you must log on as an Administrator to access
all the features.
4. Click the arrow button .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. Automatically discover or manually refresh the list of devices on the network.
Use the manual refresh if a new device was added after you logged onto the system.
• You do not need to do anything to discover devices. When you log on to the IP
Utility, the devices on the network — including the devices on other subnets —
are automatically discovered and listed in the Discovery pane. After the initial
discovery, the network automatically continues to discover devices that are newly
added to the network.
• To manually refresh the device list, click the Refresh ( ) button, located near
the top of the Discovery pane.
6. Enable or disable the HTTP Server checkbox for additional security. Only an
Administrator can disable (uncheck the box), resulting in the user being unable to
access the Web-Client, although video recording is unaffected.