Filter
Top Products
HD3MDIP/X Network Camera Reference Guide
Document 800-04132V1 Rev A 51
01/10
Figure 4-6 IP and Firmware Settings: Device Information Tab
Compression Settings
The video signal sent from the camera to the Web-Client has a number of settings that can
be edited which affect how the video displays in the Web-Client. The Compression Settings
view enables you to configure these settings:
•Stream Type
•Resolution
•Frame Rate
•Priority (Quality or Bite Rate)
• Compression Ratio (if Quality is chosen as the priority)
• Target Bit Rate (if Bit Rate is chosen as the priority)
• Maximum Bit Rate that the camera will provide across the network
• GOP (number of frames)
Device Name as entered in the
IP Utility program
IP Address on the network
(DHCP/Static/APIPA)
Firmware Settings including
product name and version
Video Format - NTSC or PAL
Subnet Mask and Default Gateway
address that connects the camera to
the network
MAC Address is a factory assigned
address unique for each device