Filter
Top Products
FEATURES FOR RECORDING
EN 39
MasterPage: Advan_Right
ADVANCED FEATURES
To find scenes on tape using thumbnail images
(Navigation Search)
1 Set the Power Switch to “PLAY”.
2 Press NAVI during video playback or stop mode.
● The loaded cassette’s Navigation
thumbnail image screen appears.
3 Press w/e/r/t to select the
desired image, and press SET.
● The “NAVIGATION SEARCH”
indication appears blinking and the
camcorder starts searching the
tape for the relevant point of the selected thumbnail image.
To cancel Navigation search midway
Press 4/9, 3, 5 or 8.
To add thumbnail images during video playback
1 Set the Power Switch to “PLAY”.
2 Press 4/9 to start video playback.
3 Press NAVI STORE at the desired point.
● The “ ” indicator appears briefly and the image of the
point where NAVI STORE is pressed is stored in the
memory card as a thumbnail image.
To delete thumbnail images
1 Set the Power Switch to “PLAY”.
2 Press MENU. The Menu Screen appears.
3 Press SET to select “t”. The VIDEO Menu appears.
4 Press r or t to select
“NAVI.DEL.”, and press SET. The
Sub Menu appears.
5 By pressing r or t:
Select “IMAGE SEL.” to delete the
currently displayed thumbnail
image.
Select “TAPE SEL.” to delete all thumbnail images for the
tape which contains the currently displayed image.
Select “ALL” to delete all thumbnail images stored in the
memory card at once.
6 Press SET. The NAVIGATION
screen appears.
7 Press r or t to select
“EXECUTE”, and press SET.
● Press w to display the previous
image. Press e to display the next
image.
● To cancel deletion, select “RETURN”.
● Thumbnail images cannot be deleted during video
playback.
CAUTION:
Do not remove the memory card or perform any other
operation (such as turning off the camcorder) during deletion.
Also, be sure to use the provided AC Adapter, as the memory
card may be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes corrupted,
initialize it.
NOTES:
● Be sure to always use the same tape and memory card
together as they were during recording; otherwise, the
camcorder cannot recognize Tape and Memory Card IDs to
perform Navigation Function properly.
● Check if an appropriate tape and memory card are loaded
when the following messages appear: “UNABLE TO USE
NAVIGATION”, “THIS MEMORY CARD IS NOT
COMPATIBLE”.
● If you change the memory card while shooting on one tape,
two memory cards will share the tape’s thumbnail images.
We recommend that you use one memory card for one
tape.
● Navigation Search does not work if the current position is at
a blank portion on the tape. Also, do not leave a blank
portion partway through the tape when shooting; otherwise,
Navigation Function does not work properly.
● Before shooting newly over a recorded tape, be sure to
delete all thumbnail images of the previous recording from
the relevant memory card.
● If you copy thumbnail images from one memory card to
another via a PC, Navigation Search does not work with the
copied memory card.
ONITNAV IGA
1 2 3
4 5 006
TC : 13:23:15
3 224YDATE: AM :’30:429AM
ID
O V E
ST– ERE O
OFONR–ATI NA R F
±0 N–HRO SY C
0
.
E C–MOD RE
OFCO Y P F–
RC
A
K S BL N H
OFPU
A
IN S/ V T F–
NRETUR
DU
DMSO N EO
L.V.DENA I
IG NANAV T IO
ETEDEL CURRENT?
EXECUTE
RETURN
3CED:2060’ 0P4M
GR-DZ9_DZ7US_07Advanced.fm Page 39 Wednesday, June 2, 2004 7:20 PM