Filter
Top Products
104
Camera Features
The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the
shooting purpose.
Ⅵ Example of display when [Aspect Ratio] = A4:3B, [Aspect Marker] = ALine+HalftoneB, and [Center Mark] = AOnB
You can turn ON/OFF the safety zone and center mark displays as shown below using the [Aspect Ratio], [Safety Zone] and
[Center Mark] settings of [Marker Setting] in the [LCD/VF] menu. (A Page 84)
[Aspect Marker] Display
Ⅵ When [Aspect Ratio] = A4:3B
[Aspect Marker] Display for Different
[Aspect Ratio] Settings
Ⅵ When [Aspect Marker] = AHalftoneB
Marker and Safety Zone
Displays (Camera Mode
Only)
Center Mark
Aspect Marker
Safety Zone
[Line] [Halftone] [Line+Halftone]
[4:3] [14:9] [16:9]/[16:9(+4:3)] [2.35:1 Center] [2.35:1C.HeadRM]
* [Aspect Marker] cannot
be set. (Fixed at AOffB)
[1.85:1 Center] [1.85:1C.HeadRM] [1.66:1] [1.75:1]