Filter
Top Products
88
Menu Display and Detailed Settings
* Default values are indicated in bold characters.
Others Menu (continued)
Item Setting Values Function
1394 Rec Trigger
Ext
Series
Split
Synchronize
Off
For setting the recording trigger for the external recording device connected to the
[IEEE1394] terminal.
Ext : Outputs recording trigger to the external system only. (Recording is not
performed by the internal system.)
Series : Outputs recording trigger to enable consecutive recording by the internal
and external systems.
Split : Outputs separate recording triggers to the internal and external systems.
Synchronize : Outputs recording trigger simultaneously to the internal and external
systems.
Off : Recording trigger is not output to the external system.
Memo:
● This item is selectable only in Camera mode. It cannot be set when recording is in
progress on the camera recorder or an external device.
● When the external recording device connected to the [IEEE1394] terminal switches to the
recording mode according to the settings, switching of operation mode using the [CAM/
MEDIA] button and the Clip Review function will be disabled.
● When [1394 Rec Trigger] is set to ASplitB, the [REC] button on the side of the camera
recorder becomes a REC Start/Stop button for the external device. (A Page 10)
● When the [REC] button is pushed immediately after the power is turned on or after a
menu setting is changed, recording with the external device might start about 10 seconds
late.
1394 Auto Power
Off
Enable
Disable
For setting whether to automatically turn off the power of the external recording device
connected to the [IEEE1394] terminal when the [POWER] switch of the camera is turned
off.
Enable : Turns off the power automatically.
Disable : Disables this function.
Memo:
● The IEEE1394 control is only valid for external devices with a POWER OFF button.
Reset All
^ Resets all menu settings.
Select AResetB in the [Reset All] menu and press the Set button (R). The message
AResetting...B appears. After the resetting process is complete, the message ACompleteB
appears for about 1 second. Reset will not be performed if [Cancel] is selected.
Memo:
● [Date/Time] (A Page 88 ) and [Time Zone] (A Page 88 ) cannot be reset.
● This item is not selectable when recording in Camera mode, during Clip Review, and in
Media mode.
Date/Time
^ For setting the year, month, day, hour, and minute.
Memo:
● The display order of the date (year, month, and day) follows the [Date Style] setting in the
[Status Display] menu. However, the 24-hour format is used for the hour display
regardless of the [Time Style] setting. (A Page 85)
Time Zone
UTC-00:30 to UTC-12:00,
UTC,
UTC+14:00 to
UTC+00:30
(In increments of 30
minutes)
For setting the UTC time difference in units of 30 minutes.
[Default values: UTC-05:00 (U model), UTC (E model)]
Memo:
● If [Date/Time] is already set, the value is automatically adjusted when [Time Zone] is
altered.
System
Information
For displaying the usage time of the internal fan.
Memo:
● Under normal environment, dust will accumulate on the internal fan when the camera recorder is used over a long
period. Dust may enter the camera especially if it is used outdoors. This may affect the image and sound quality of the
camera recorder. Check and replace the fan after every 9000 hours (suggested guideline).
Fan Hour