Filter
Top Products
95
* 1 : The variable range of the shutter speed varies according to the video format settings. (A Page 38)
* 2 : Displayed when the [WHT.BAL] white balance selection switch is set to APRESETB.
Item Description
I Skin Detail Operation
Appears as AS.DTLB when the Skin Detail function is turned ON.
J Operation of Functions
SKIN AREA : Blinks when the Skin Area display is ON.
FOCUS : Appears when the Focus Assist function is activated. When AACCU-FocusB is enabled,
AACCU-FOCUSB blinks for about 10 seconds while Focus Assist starts up, after which
the AFOCUSB indicator lights up. When [ACCU-Focus] is activated, it is forcibly turned
OFF after recording starts. (A Page 83)
K Luminance Information
Appears when the Spot Meter function is activated. For details of the display, refer to [Setting Spot Meter]
(A Page 51 ).
MAX : Maximum luminance
MIN : Minimum luminance
L Event/Warning Display
Area
Displays the settings for about 3 seconds when the gain or shutter speed is manually changed.
For other messages displayed in this area, refer to [Error Displays and Actions] (A Page 122 ).
Displayed Content Setting Status
GAIN **dB (** : 0, 3, 6, 9, 12, 15, 18) Gain value is altered
GAIN ALC Gain is set to AALCB
FULL AUTO ON, FULL AUTO OFF [FULL AUTO] is turned AON/OFFB
ZEBRA ON, ZEBRA OFF [Zebra] is turned AON/OFFB
FOCUS ASSIST ON, FOCUS ASSIST OFF [Focus Assist] is turned AON/OFFB
SHUTTER **
(****K : 1/6, 1/6.25, 1/7.5, 1/12, 1/12.5, 1/15, 1/24, 1/
25, 1/30, 1/48, 1/50, 1/60, 1/100, 1/120, 1/
250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000)
Shutter speed is altered *1
V. SHUTTER **** (**** : 1/24.01 to 1/1998.0) Variable shutter speed is altered *1
SHUTTER OFF **
(**** is the standard shutter value in the respective
modes.)
Shutter is turned AOFFB *1
WHITE BAL * <****K>
(* : A, B, PRESET)
(****K : 2300, 2500, 2800, 3000, 3200, 3400, 3700,
4300, 5200, 5600, 6500, 8000)
White balance value is altered
WHITE BAL FAW FAW (Fulltime Auto White balance) is activated
FILTER ****
(** : OFF,1/4ND,1/16ND)
[ND FILTER] setting is altered
AE LEVEL **
(**** : -3, -2, -1, NORMAL, +1, +2, +3)
[AE LEVEL] value is altered
SPOT METER ****
(**** : ON, FIXED, OFF, SELECT)
Spot meter status is changed
(A Page 51)
BLACK NORMAL [Black Toe] is set to ANormalB
BLACK STRETCH * (* : 1,2,3,4,5,) [Stretch Level] of [Black Toe] is altered
BLACK COMPRESS * (* : 1,2,3,4,5,) [Compress Level] of [Black Toe] is altered
WHITE BAL PRESET <3200K>, WHITE BAL PRESET
<5600K>
[Preset Temp.] value is altered *2
REC SWITCH LOCKED, REC SWITCH UNLOCKED Record button lock switch is turned ON/OFF in
Camera mode, or [REC] switch on the handle of
the camera recorder is pressed while being
locked
SLOT SWITCHED * (* : A, B) Active SDHC slot is switched automatically or
using the [SLOT SELECT] button in Camera
mode.
TRIGGER TO HD, TRIGGER TO DV Recording command is sent out from the
[IEEE1394] terminal
FRAME RATE rrrr/pp fps
(rrrr: recording frame rate, pp: playback frame rate)
Variable frame rate is adjusted using the cross-
shaped button (H I)
OK MARK ADDED, OK MARK DELETED OK mark is added or deleted
(A Page 64)
Other Displays (A Page 122 [Error Displays and Actions])
M Frame Rate
Appears as xx/yy fps (xx: recording frame rate, yy: playback frame rate) only when AVariable FrameB is set
in the [Rec Mode] menu. (A Page 71)