Filter
Top Products
77
* Default values are indicated in bold characters.
Item Setting Values Function
White Clip
100%
108%
For setting the point to apply white clip for input video signals with a high luminance level.
100% : Applies white clip at the point where the luminance level is 100 %. Even when this
item is set to A108%B, it switches automatically to A100%B if the screen appears too
white. Set to this value when the system in use limits Y output signals within 100 %.
108% : Applies white clip at the point where the luminance level is 108 %.
Gamma
Film Out
Cinema
Standard
Off
For adjusting the gamma curve that determines the gradation expression.
Film Out : Sets to a gamma curve that focuses on the gradation expression of dark areas in
order to ease post-processing of movie film output.
Cinema : Sets to a gamma curve with similar gradation to the screen characteristics of
movies.
Standard : Sets to a standard gamma curve.
Off : Disables gamma curve adjustment.
Master Level
Max, 4 to1,
Normal,
-1 to -4, Min
This item can be specified separately when [Gamma] is set to AStandardB, ACinemaB, or AFilm
OutB.
Increase the number : Enhances the gradation of black. However, the gradation of bright
areas deteriorates.
Decrease the number : Enhances the gradation of bright areas. However, the gradation of
black deteriorates.
Memo:
● When [Gamma] is set to AOffB, this item appears as A---B and cannot be selected.
R Level
Max, 4 to1,
Normal,
-1 to -4, Min
Gamma curves can be adjusted for each of R, G, and B.
Use this to adjust to a color tone that cannot be expressed by the [Color Matrix] setting.
Memo:
● When [Gamma] is set to AOffB, this item appears as A---B and cannot be selected.
G Level
B Level
White Balance...
Menu for adjusting white balance. (A Page 79)
Color Matrix
Cinema Subdued
Cinema Vivid
Standard
Off
For setting the color matrix.
Cinema Subdued : Sets to a subdued color matrix that is similar to the screen characteristics
of movies.
Cinema Vivid : Sets to a vivid color matrix that is similar to the screen characteristics of
movies.
Standard : Sets to a standard color matrix.
Off : Sets the color matrix function to Off.
Adjust...
This item is used to adjust [Color Matrix] to a color according to the user’s preference.
This item cannot be selected when [Color Matrix] is set to AOffB. (A Page 80)
Color Gain
Off, Min, -1 to -9,
Normal
9 to 1, Max
For adjusting the video signal color level.
Off : Sets the video to black-and-white.
Increase the number : Makes the colors more dense.
Decrease the number : Makes the colors less dense.
Memo:
● Images are displayed in black-and-white when this is set to AOffB.
DNR
On
Off
For setting the DNR (Digital Noise Reduction) function. The S/N ratio of the video can be
enhanced by setting [DNR] to AOnB.
On : Enables noise reduction.
Off : Disables noise reduction.
Memo:
● A retained image may appear when this is set to AOnB.
Reverse Picture
Rotate
Off
For recording images correctly by reversing the image horizontally or vertically (Rotate) when
the lens image appears upside down or laterally inverted.
Rotate : Enables horizontal/vertical inversion of the image.
Off : Disables horizontal/vertical inversion of the image.
Reset Process
^
Restores all items in the [Camera Process] menu to their default settings.