Filter
Top Products
EN13
GETTING STARTED
PAUSE
F . AUTO
PAUSE
MANUAL
5S
P
L
A
Y
O
F
F
Operation Mode
Tuning the Power Switch allows you to choose the
appropriate operation mode among the following modes:
Full Auto mode ( ), Manual mode ( ), 5 second
recording mode (5S), Progressive mode ( ) and
Playback mode ( ).
According to the Power Switch position you
have selected, “F.AUTO” or “MANUAL”
appears in the upper left corner.
To turn on the camcorder, first set the Power
Switch to any operation mode except “OFF”,
then pull out the viewfinder fully or open the
LCD monitor. When setting the Power Switch
from “OFF” to any other position, press and
hold the lock button located on the switch.
When set to “ ”
When set to
“
”, “5S” or “ ”
(When set to “5S”,
“MANUAL” blinks.)
Power lamp
Lock Button
Power Switch
Function
Position
Allows you to record using NO
special effects or manual
adjustments. Suitable for standard
recording.
Allows you to set various
recording functions using the
Menus. If you want more creative
capabilities than Full Auto
recording, try this mode.
Allows you to record in 5-second
clips to keep the action moving.
Enables shooting in Manual
mode. However, Focus and
Exposure are the same as in the
Full Auto mode, and it is not
possible to change menu settings
using the Select Dial.
Allows you to record moving
images (successive jitter-free still
images) with superior quality. A
high-resolution still image can
also be processed on a personal
computer or can be printed out.
Allows you to play back a recording,
੬ pg. 43 – 51.
Allows you to switch off the
camcorder. After setting to this
position, Manual Focus and
Exposure Control are automati-
cally reset to “AUTO”.
Full Auto:
Manual:
5 second
recording
mode:
5S
OFF
Progressive
mode:
Playback:
Power Switch
Camera Position
If you have selected , then these
indications do not appear.