Filter
Top Products
34 EN
5S
P
L
A
Y
O
F
F
PAUSE
4
P. AE / EFFECT
SLOW 4X
1
SLOW 10X
2
B
/
W
STROBE
TWILIGHT
SEPIA
MONOTONE
CLASSIC FILM
SEL.
FOCUS
EXPOSURE AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
4
FADER
/ WIPE
P. AE
/ EFFECT
END
FLASH ADJ. 0
Program AE With Special Effects
IMPORTANT:
If certain Fades or Wipes (
੬
pg. 33) are activated, some
modes of Program AE with special effects cannot be used.
If you select a mode that is unusable in the current
situation, the mode's symbol blinks.
You can choose any one of the effects from the P.AE/
EFFECT Menu.
1
SELECT OPERATION MODE
Set the Power Switch to “ ” or “ ” while pressing
down the Lock Button located on the switch, and pull
out the viewfinder fully or open the LCD monitor
fully.
2
ACCESS MANUAL MODE ITEM MENU
Press the Select Dial. The Manual Mode Item Menu
appears.
3
ACCESS “P.AE/EFFECT” SELECT MENU
Rotate the Select Dial to move the highlight bar to
“P.AE/EFFECT”, then press it.
4
SELECT MODE
Move the highlight bar to the desired mode by
rotating the Select Dial, then press it.
•The P.AE/EFFECT Menu disappears and the selected
mode is activated. The symbol of the selected mode
appears.
5
DISABLE MODE
To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to “OFF”
by rotating the Select Dial. Then press it.
NOTES:
●
Program AE with special effects can be changed
during recording or during Record-Standby.
●
When “DIS” is set to “ON”, “VIDEO ECHO” is
disabled.
●
Even if you set “DIS” to “ON” (
੬
pg. 29) with
“CLASSIC FILM”, “STROBE” or “SLOW” activated,
“DIS” will be disabled.
Display
RECORDING
Advanced Features (cont.)
Manual Mode Item
Menu
P.AE/EFFECT Menu
The indicator for the selected mode appears, and the
selected mode is engaged.
Select Dial
Power Switch
Lock Button
Power lamp