Filter
Top Products
EN59
TW
MAKE CONNECTIONS
Also refer to pg. 48, 49 and 51.
1
CONNECT TO . . .
JVC VCR EQUIPPED WITH REMOTE PAUSE
TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE OR
Connect the editing cable to the RM-V711U’s
PAUSE-IN connector.
2
PREPARE CAMCORDER
Insert a recorded tape and set the Power Switch to
“ ”.
3
PREPARE VCR
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
SELECT SCENES
4
START SOURCE PLAYBACK
First set the Power Switch to “ ” while pressing
down the Lock Button located on it. Press PLAY (
4
)
and then press R.A. EDIT ON/OFF on the remote
control. Make sure to point the remote control at the
camcorder’s remote sensor.
•The Random Assemble Editing Menu appears.
5
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the
beginning of Program 1.
CONTINUED ON NEXT PAGE
FADE/WIPE
PLAY
R.A.EDIT
ON/OFF
DISPLAY
To Remote
PAUSE
S-Video
cable
(provided)
To
S-VIDEO
OUT
To EDIT
RM-V711U
(provided)
VCR
TV
A/V cable
(provided)
To AUDIO,
VIDEO and
S-VIDEO IN
connectors
To PAUSE-IN
NOTES:
●
Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they appear
during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound
Mode Display, press DISPLAY on the remote control. Select “DISPLAY” and “TIME CODE” from the
Playback Menu (
੬
pg. 46) to show or hide the Date/Time and the Time Code on the recording. To show or
hide all indications except for the Random Assemble Editing Menu, press IND. ON/OFF on the camcorder
for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not
recorded on the new tape.
●
When editing on a video unit equipped with DV input connector, the DV cable can be connected instead of
the S-Video cable and Audio/Video cable.
To AV OUT
Open the
cover.
Editing cable
(provided)