Filter
Top Products
40 EN
5S
P
L
A
Y
O
F
F
W . BAL .
AUTO
FOCUS
EXPOSURE AUTO
OFF
AUTO
AUTO
W. BALANCE
FADER
/ WIPE
4
END
OFF
FLASH ADJ.
P. AE
/ EFFECT
0
FOCUS
EXPOSURE AUTO
OFF
AUTO
W. BALANCE
FADER
/ WIPE
4
END
AUTO
OFF
FLASH ADJ.
P. AE
/ EFFECT
0
White Balance Adjustment
A term that refers to the correctness of colour reproduction
under various lighting. If the white balance is correct, all
other colors will be accurately reproduced.
The white balance is usually adjusted automatically.
However, the more advanced camcorder operator would
prefer to control this function manually and achieve a
more professional colour/tint reproduction.
1
SELECT OPERATION MODE
Set the Power Switch to “ ” or “ ” while pressing
down the Lock Button located on the switch, and pull
out the viewfinder fully or open the LCD monitor
fully.
2
ACCESS MANUAL MODE ITEM MENU
Press the Select Dial. The Manual Mode Item Menu
appears.
3
ACCESS WHITE BALANCE ADJUST-
MENT
Move the highlight bar to “W.BALANCE” by rotating
the Select Dial. Then press it. The Manual Mode Item
Menu disappears. “W.BAL.” appears in the upper left
corner and the currently selected mode indication is
also displayed.
4
SET FUNCTION PARAMETERS
Cycle through the available settings of the selected
functions by rotating the Select Dial, and stop when
the one you want is displayed.
“AUTO” – The white balance is adjusted automati-
cally. This is the factory preset position.
“
” – When shooting with the white balance
already having been set on the subject
(
੬ pg. 41).
“ ” – When shooting outdoors on a sunny day.
“
” – When shooting outdoors on a cloudy day.
“
” – When using a video light or other similar
type of lighting.
5
CLOSE WHITE BALANCE ADJUSTMENT
Press the Select Dial again. Selection is complete.
The indication “W. BAL.” changes to “MANUAL”.
To Return To Automatic White Balance . . .
.... select “AUTO” in step 4. Or set the Power Switch to
“ ”.
NOTE:
White balance cannot be used when Sepia or Monotone
(
੬
pg. 35) is activated.
RECORDING
Advanced Features (cont.)
White Balance
Adjustment
Manual Mode Item
Menu
Display
Power SwitchSelect Dial
Lock Button
Power lamp