Filter
Top Products
31
Starting Up V.Networks Controller
Settings (Step 3 Setting with V.Networks Controller)
With the installed Controller, camera images can be monitored. The settings for
recording, replay and frame rate etc. can also be performed.
1.
Select [Start], [Programs], [V.NETWORKS] and then [V.Networks Controller] to start
up [V.Networks Controller].
2
Live images from the camera are displayed.
Note
• If a password has been set, enter the correct password.
• This [Controller] can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (only for JPEG), VN-
A1, VN-C10, VN-C11 and VN-C655.
1
In the pull down menu, select the camera
to connect.
Caution
After the power for VN-C655 is turned
on, there will be about 20 seconds until
VN-C655 becomes ready to be con-
trolled with the PC. This is not a de-
fect.
VN-C655(reed me)_p30-Cover 04.9.22, 8:19 PM31