Filter
Top Products
Manual: CMOS Industrial Camera LOGLUX
i5Version 1.08 (04/07)
KAMERA WERK DRESDEN GmbHPage 13 of 46
The start menu
When starting the software for the first time, a
window will appear after some time that shows
the image processing (IP) hardware of the PC
which is connected to the existing
framegrabber, FireWire and/or RS-232 ports.
A query window will appear in all following
program starts, asking the user if the IP
hardware settings of the previous program start
are to be used again or if an IP hardware scan
as referred to above is to be made.
When selecting the LOGLUX
i5 CL cameras
connected to the respective ports (the camera
names are displayed), the following should be
noted:
Cameras plugged into RS-232 ports do not
deliver a live image with the configuration tool.
Where a camera image is needed, the viewing
software of the framegrabber or a suitable
third-party software should be used.
Cameras connected to the other ports deliver
an image right away when the configuration
tool is activated. All the user has got to do is
adjusting the image to a size that fits the
desktop PC.
A camera is activated by highlighting its name
in the 'Camera selection' window and then
clicking button 'Connect' . Should a camera not
be found, another hardware scan can be
started by clicking button 'Scan'. Pressing
button 'Cancel' will end the program.
Figure 9 : The start menu