Filter
Top Products
Using the Long Roll Accessory
August 2001 D-41
A dialog box appears.
3. Make sure no film is in the gate. Click Yes.
The rollers rotate.
CAUTION: In the step below, do not use rubbing alcohol.
4. Using a lint-free cloth with 90% or higher isopropyl alcohol, wipe the exposed
part of the moving rollers—in the slot at the rear of the housing—from top to
bottom. Repeat until the cloth stays clean.
5. On the Film Controls window, click Stop.
P192_1568GC
roller
P192_1568GCA