Kodak HR 500 Photo Scanner User Manual


 
Connecting and Operating the Scanner
August 2001 2-7
Powering up the Scanner and the Host Computer
1. Turn on the scanners power switch.
NOTE: The green LED light on the scanner indicates only that AC power is
supplied to the scanner, not that the system is ready.
Three sets of beeps will sound (first set: one beep; second set: two short
beeps; third set: two short, then one long beep).
As a visual indicator that the scanner is ready, the scanner lamp lights and
remains lit.
2. Turn on power to the host computer and wait until the computer desktop
appears.
3. Wait 10 minutes for the lamp to warm up.
P192_0019HC
power
switch