Konica Minolta 9 Digital Camera User Manual


 
OTHER — PC TerminalOTHER — Remote Release Terminal
8180
Flash units which can not be connected to the accessory shoe can be connected to
the camera via the PC terminal.
TTL automatic flash metering does not function when the flash is connected to the PC
terminal.
1. Set the exposure mode dial to M,
then set the shutter speed to 1/250
or slower.
Flash units with a low trigger voltage may not work on this
camera. Contact a Minolta Service Facility if your flash has a
low trigger voltage.
2. Plug the PC connector into the
camera’s PC socket.
The flash unit may fire unexpectedly if it is on
when the sync. cord is plugged into the PC
terminal.
The PC terminal is compatible with both center
positive (normal polarity) and center negative
(positive polarity) flash units.
1. Slide the remote-control-terminal
cover down.
Attach either the Remote Cord RC-1000S or RC-1000L (sold separately) to reduce
blur when taking long exposures.
2. Insert the plug into the terminal.
ADDITIONAL FEATURES