Konica Minolta 9 Digital Camera User Manual


 
101100
The aperture and shutter speed change in 1/2 or 1/3 EV increments depending on the
position of the exposure compensation dial.
Flash can not be used with the PA and PS modes.
-Built-in and accessory flashes will not fire when the PA and PS modes are active.
-P
A and Ps modes can not be selected when appears in the viewfinder.
If the shutter speed or aperture blink, the required setting is not available. Turn the control
dial until the blinking stops.
Cust 18-2 Creative Program
P
A / Ps Mode Operation
While the aperture/shutter speed are displayed in P-mode…
Turn the front control dial to change
the shutter speed.
Aperture is adjusted automatically.
Cancelling PA / Ps Mode
Wait until the displayed data disappears for the data panel or raise
the built-in flash.
After the AE system has been activated, you can change the shutter speed or
aperture selected by the camera. Creative program remains active until the data
panel display disappears.
Cust 18 — Control Dial Tasking
1 – Default operation
2 – Creative Program
3 – Exposure Compensation
Creative program control (PA /Ps) lets you override the exposure settings
selected by the camera in P– mode. A and S – mode operation does not change.
The exposure compensation value is displayed in the meter index.
Exposure compensation dial must be set to +/– 0.
Compensation range is +/– 3 EV for both 1/2 and 1/3 EV increments.
Lower viewfinder indicators will disappear when the rear control dial is operated.
Changes the tasking for the rear control dial to exposure compensation. Tasking
for the front control dial is the same as setting 1.
Control Dial Tasking
no function
aperture
shutter speed
Front Control Dial Rear Control Dial
Exposure
Mode
P – Mode
A – Mode
S – Mode
no function
aperture
shutter speed
Turn the rear control dial to change the
aperture.
Shutter speed is adjusted automatically.
Control Dial Tasking
Ps - shutter speed
aperture
shutter speed
Front Control Dial Rear Control Dial
Exposure
Mode
P – Mode
A – Mode
S – Mode
P
A - aperture
aperture
shutter speed
Control Dial Tasking
no function
aperture
shutter speed
Front Control Dial Rear Control Dial
Exposure
Mode
P – Mode
A – Mode
S – Mode
exposure
compensation
Refer to page 98 to change the data panel display duration.
Custom Function Notes
CUSTOM FUNCTIONS
SPECIAL FUNCTIONS