Filter
Top Products
100
D
ATA-TRANSFER MODE
If a minor problem occurs during printing, such as the paper runs out, follow the procedure recom-
mended for the printer; no action is required for the camera. If a major printer error occurs, press
the controller to end the routine. Refer to the printer manual for the correct procedure for the printer
problem. Check the printer settings before starting again and deselect the images that were printed.
NAVIGATING THE PICTBRIDGE MENU
Navigating the menu is simple. Pressing the menu button turns the menu on and off. Push the con-
troller in the direction to move the cursor and change settings on the menu. Pressing the controller
selects menu options and sets adjustments.
Once a setting has been selected, the cursor will return to the menu options and the new setting
will be displayed. To return to the PictBridge screen, press the menu button.
NOTES ON PRINTING ERRORS
When the desired menu section is displayed, move the controller up and down to scroll
through the menu options. Highlight the option whose settings need to be changed.
With the menu option to be changed highlighted, move the controller right; the settings are
displayed with the current setting highlighted. If “Start” is displayed, press the center of the
controller to continue.
Move the controller left and right to highlight the appropriate menu tab; the menus will
change as the tabs are highlighted.
Press the controller to select the highlighted setting.
Move the controller up and down to highlight the new setting.