Filter
Top Products
14
G
ETTING UP AND RUNNING
GETTING UP AND RUNNING
INSERTING THE BATTERIES
This digital camera uses two AA-size alkaline batteries or Ni-MH batteries. AA-size Ni-MH batteries
are recommended because of longer life. Do not use other types of batteries with this camera.
When using Ni-MH batteries, fully recharge them with a battery charger suitable for complex elec-
tronic equipment. Please consult your vendor about an appropriate charger. When replacing the
batteries, the camera should be turned off.
Slide the battery-chamber door toward the front of the camera to release the safety catch (1). Open
the door.
Insert the AA batteries as shown; make sure the positive and
negative battery terminals are oriented correctly (2).
Close the battery-chamber door and slide it toward the back
of the camera to engage the safety catch.
After installing the batteries, the set-date/time mes-
sage may appear on the monitor. Set the date and
time following the instructions in page 20. The clock
and calendar can also be set in section 3 of the
setup menu. If the camera is not used for several
hours after the batteries are taken out, the clock,
calendar, and memory settings are lost.
1
2