Konica Minolta DiMAGE X31 Digital Camera User Manual


 
75
When the this-frame or all-frames setting is chosen, a screen will appear requesting the number of
copies of each image; a maximum of nine copies can be ordered. Move the controller up and down
to set the required number of copies. If the all-frames setting was used to create a print order, any
additional images recorded afterwards will not be included in the order.
DPOF files created with another camera will be canceled. After the pictures have been printed, the
DPOF file will still remain on the memory card and must be canceled manually.
To create a DPOF file for the displayed or highlighted image.
This
frame
All
frames
Marked
frames
To chose a group of images to be printed or when the number of copies of
each image varies. When selected, the frame selection screen will appear.
Move the controller left and right to highlight an image to be printed. Moving
the controller up will mark the image with the print indicator. The number next
to the indicator shows the number of copies that will be printed. Moving the
controller up will increase the number of copies, moving the controller down
will decrease the number. A maximum of nine copies can be ordered. To dese-
lect an image for printing, move the controller down until the number of copies
reaches zero and the print indicator disappears. Continue until all the images
to be printed are marked. Press the controller to create the DPOF file, or press
the menu button to cancel the operation.
To create a DPOF file for all images on the memory card.
Cancel all
To delete the DPOF file.
DPOF print order for single, multiple, or all files on the memory card can be created in the advanced
playback menu (p. 65). The print menu option has four settings:
Creating print order for multiple images