Filter
Top Products
18
G
ETTING UP AND RUNNING
INSTALLING AND REMOVING A MEMORY CARD
An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.
If a card has not been inserted, a no-card warning will appear on the LCD monitor; the shutter can
still be released, but no image is recorded.
Always turn off the camera and confirm the indicator lamp is not red and
blinking before changing the memory card, otherwise the card may be
damaged, and data lost.
Insert the memory card all the way into the card slot and then
release. The card should catch in the slot.
Insert the card. Make sure the face of the card is toward the
front of the camera. Always push the card in straight, never at
an angle. Never force the card. If the card does not fit, check
that it is orientated correctly.
To eject a memory card, press the card into the slot and
release. The card can now be pulled out.