Konica Minolta DiMAGE X31 Digital Camera User Manual


 
42
R
ECORDING - ADVANCED OPERATION
The continuous-advance drive mode allows a series of images to be captured while
holding down the shutter-release button. The number of images that can be captured
at one time and the rate of capture depend on the image-quality setting. The maximum
rate of capture is 0.8 fps. Continuous-advance drive mode is set in the main recording
menu (p. 36).
Compose the picture as described in the basic recording opera-
tion section (p. 25). Press the shutter-release button partway
down to lock the exposure and focus for the series (1). Press and
hold the shutter-release button all the way down (2) to begin tak-
ing pictures.
When the shutter-release button is pressed and held, the camera
will begin recording images until the maximum number has been
taken or the shutter button is released. The built-in flash can be
used, but the rate of capture is reduced because the flash must
recharge between frames. Date imprinting (p. 56) also reduces
the rate of capture.
The maximum number of images that can be captured with differ-
ent image quality is as follows:
2048 X 1536 Fine: 3
2048 X 1536 Standard: 4
1600 X 1200 Standard: 6
1280 X 960 Standard: 8
640 X 480 Standard: 17
Continuous advance
1 2